• Vakkundig personeel
  • Uitstekende voorwaarden
  • Zeer hoge tevredenheid

INDESIT HOTPOINT ARISTON VAATWASSER STORINGSCODES

0.00

Levertijd 1-3 werkdagen

  • Snelle levering
  • Vaak volgende dag al in huis
  • Uitstekende voorwaarden
  • Zeer hoge tevredenheid
  • Vakkundig personeel
  • 6 dagen in de week geopend
Artikelnummer: AD284 Categorie:

Beschrijving

FOUTCODE INDESIT HOTPOINT ARISTON:

Hotpoint Ultima Dishwasher Fault Codes These fault codes are written for dishwasher repairers and not for the general public by Hotpoint and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic dishwasher fault finding guide from this link before you begin.

Please check that any Hotpoint dishwasher spares recommended are suitable for use on your particular model and serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your particular dishwasher model. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

 

AL01

 
Flood protection system activated
  • Flood protection activated
  • Check pressure switch
  • Check wiring
  •  
 

AL02

 
Valve or connections – dishwasher will not fill with water
  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring
  •  
 

AL03

 
Failure to drain
  • Check for blockage
  • Check outlet hose for blockage or obstruction
  • Check drain pump
  • Check wiring
  •  
 

AL04

 
Thermistor error detected – temperature sensor short, open circuit or out of range
  • Check wiring to thermisrtor
  • Check thermistor
  •  
 

AL05

 
Circulation pump blocked or faulty
  • Check filters
  • Check circulation pump motor for blockages
  • Check main circulation pump
  •  
 

AL06

 
Fill timeout
  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring
  •  
 

AL07

 
Not used
  • This error code is not used on this range of Hotpoint Ultima dishwashers
  •  
 

AL08

 
Heating timeout
  • Check wash heater
  • Check thermistors
  •  
 

AL09

 
Software recognition error
  • Reprogram the dishwasher EEPROM
  • Replace electronic control module
  •  
 

AL10

 
Heating circuit error
  • Check water heating element
  • Check thermostats
  • Check wiring
  •  
 

AL99

 
Communications error between boards
  • Check wiring between control boards
  • Replace electronic control module
  •  
 

H20

 
Fill timeout
  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring
  •  
 
 
 
 
 
 
  Hotpoint Dishwasher Fault Codes Like other fault codes these written for dishwasher repairers and not for the general public by Indesit Group and they assume a certain level of competence on the part of the user in diagnostic routines. We may have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a dishwasher please refer to our basic fault finding guide from this link before you begin.

Please check that any dishwasher spares recommended are suitable for use on your particular model and production code or serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

Hotpoint Dishwasher Reset Procedure It is usually necessary to 'reset' the machine after a fault code has been displayed.  

To reset please follow the steps below.

  • Switch dishwasher off
  • Rotate the selector switch to STOP/CHANGE and switch on
  • After a few seconds the LED?S will go out enabling a new programme to be selected
  •  
  • If an error still exists or persists after this has been carried out then you will have to investigate the fault or call a dishwasher engineer.

    Fault Code Lights Legend This is our very simple legend to show the state of the lights, lamps or LED's as they are unlit, flashing or lit continuously.

     

    LED or lamp not lit when error is encountered on the dishwasherLight or LED not litLED or lamp flashing when an error is encountered on the dishwasherLight or LED flashingLED or lamp is lit constantly when an error is encountered on the dishwasherLight or LED lit solid, no flash
    Hotpoint Dishwasher Fault Codes For this set of dishwasher error codes the lisghts are usually as follows, shown below as corresponding left to right in our fault chart:

    Wash = 1

    Drying = 2

    End = 3

    Start/Pause = 4

    On most faults the power on/off lamp will be flashing, ignore this.

     

     

    LED or lamp is lit constantly when an error is encountered on the dishwasher

     

    LED or lamp not lit when error is encountered on the dishwasher

     

    LED or lamp not lit when error is encountered on the dishwasher

     

    LED or lamp not lit when error is encountered on the dishwasher

    2024 Copyright Euromaxx | Website ontwerp & Realisatie door Wubble | Content creatie door Dees