Description
Universal 49 x 1.2 x 1.2 mm square belt drive belt as a replacement drive belt for hi-fi equipment.
This replacement belt can be sent affordably within the Netherlands as a mailbox package.
The 49 x 1.2 x 1.2 mm square belt drive belt is available immediately from stock.
How do you know which belt you need?
- Lay the belt flat along a ruler.
- Measure the length in millimeters and multiply it by 2. This is the total length, as if you had cut the belt and measured it completely.
- Divide the total length by 3.14 to calculate the diameter. For example, if you measure a total length of 100 mm, then 100 divided by 3.14 equals 31.85 mm.
- Because an old belt is often stretched, you should best multiply the result by 97%. A slackened belt often causes problems.
- Also check the shape of the belt. It can be a square, round, or flat belt.
- Pay attention to the available width. Sometimes, for example, a 4 mm belt is no longer available, while 5 mm may fit.
If no belt is present anymore or if it has degraded, use a piece of string to measure the size.
What do you do with the result? In this example, the calculation is: total belt length 100 mm divided by 3.14 = 31.85 mm. Multiplied by 97% that is 30.89 mm.
Take this result to the SNAREs category. First choose whether you need a square, flat, or round belt, and then select the closest available size.
Also check out our other maintenance items, such as cassette deck and cd oil, lubricant and lubricant/grease.









