AEG E5E E91 circuit board servicing

Servicing of your AEG circuit board for E5E, E91 or completely dead fault. Send the module complete in the plastic cassette; if there is a second circuit board, we inspect it free of charge.

€59.95

Directly available from stock

  • Fast delivery
  • Excellent conditions
  • Very high satisfaction
  • Professional staff
SKU: AD020025 Categories: ,

Description

With an AEG E5E E91 circuit board servicing, your defective module is professionally repaired. These faults often indicate a communication problem or a defective circuit board in AEG, Electrolux and Zanussi washing machines and heat pump tumble dryers.

  1. E5E means: “Communication error between inverter and main board”. This fault applies to both tumble dryers and washing machines. In tumble dryers the display often still works, but when you start a program you only hear clicks in the module and nothing else happens. This is usually the case with a heat pump tumble dryer. A faulty plug connection can be the cause, but most of the time the circuit board or module is defective.
  2. E91: error codes E90, E91, E92, E93 or E94 indicate configuration or communication problems between electronic components. Most of the time the circuit board or module is defective; in exceptional cases the control panel is defective.
  3. Does the appliance do absolutely nothing anymore, as if the plug has been pulled out? Then the circuit board or module is usually defective.

By ordering this article, you purchase the servicing of your circuit board. You send the circuit board to us, after which we repair it. You can also include the larger circuit board; we don’t charge anything extra for that.
There are 2 circuit board versions in circulation;

  1. a version with two circuit boards, such as in the first photo;
  2. a version where only an upright circuit board is located at the top. See the second photo for this type of circuit board.

WHAT DO YOU NEED TO DO?

Remove the back panel. This is often secured with Torx 20 screws.
Check all plug connections between the module and the motor.
Also check the plug connections on the motor itself.
Is everything in order? Then disassemble the module from the motor. This is located at the bottom. First take good photos of the connections, so that you don’t connect anything incorrectly when reassembling.
Next, open the white cassette and check whether you see defects, loose solder connections or burn marks. Often, this small housing contains a defective module with burn marks in the middle of the circuit board.
It then concerns the circuit board that is shown on the first photo on the right: the smallest of the two circuit boards.
Faults also occur on the larger circuit board. That’s why you can include it for free for inspection. We then usually resolder weak points again and replace weak components where needed. This is the circuit board shown in the first photo. It is located all the way at the top: to remove it, remove the top cover. You’ll find it on the right side at the back. Also take photos of this first, so that you can connect everything correctly later.

SHIPPING:

Send your circuit board or circuit boards to Euromaxx preferably complete in the plastic cassette. The address is shown at the top right of the homepage under CONTACT

Note the name under which you placed the order or the order number from the webshop.

Use the cheapest shipping method; nowadays you always receive a track & trace code with a parcel. Shipping registered is unnecessarily expensive.

Questions about this product?

Send your question, possibly with photos, to our business WhatsApp 06-25229613 (only messages, calling is not possible) or email [email protected].

Euromaxx has more than 30 years of experience restoring and repairing vintage audio equipment. We repair all hifi and audio brands and are the specialist for Marantz. Do it yourself? We also supply separate parts, including many specially produced examples.

You can also use Signal for messages via 06-25229613.

EXCEPTIONS;

This fault applies to all models with a power switch under the round program selector knob, such as the models below.

Zanussi – AEG – Electrolux

Check the location of this circuit board at https://www.euromaxx.nu/EHO-Storing-AEG-wasmachine-of-is-helemaal-dood

EDC2086GDW
EDH97960W
T61270AC
T65370NAHT
75177NAV
T76385AH1
T86585IH
EDC2086PDW
EDI97170
Lavatherm 65170AV
T65470AH1
T75280AC
T76386NAH
T86589IH
EDC66150
EDP2074PEW
Lavatherm 65179AV
T67682NIH
T75370AH2
T76389NAH
T86595DIH
EDC67555W
EDR10621CA
T65270AC
T65771NIH
T75373NAH
T76485AH
T86597NIH
EDC77570
EDR10621
T65273AC
T71270AC
T75382NAH
T76485DIH
T87685DIH
EDE1074PDW
0194_0003 G
T65274AC
T71272AC
T5470IH1
T76485IH2
T87687NIH
EDH3386GDW
T65276AC
T71272NAC
T75480DIH
T76488IH2
T88595IS
EDH3686GDE
T65278AC
T71276AC
T75480IH1
T76782NIH
T88597NIS
EDH3786GDE
T35740
T65280AC
T72270AC
T76282AC
T76789NIH
T97689IH
EDH3786GDW
T37850
T65289NAC
T72276NAC
T76283AC
T77685DIH
EDH3886GDE
T5127AC
T65370AH3
T75175AV
T76285AC
T77687NIH

If your circuit board is damaged beyond repair or if we can no longer repair it, then you pay no servicing costs. We will credit the full amount, unless the irreparable circuit board or circuit boards need to be returned to you. In that case, we only deduct the return shipping costs from the credited amount.