Bosch Siemens NTC sensor probe

NTC sensor probe for Bosch and Siemens washing machines, among other things for TXL and older Maxx 6 models. Check the connections and provide the FD and E numbers for the correct version.

€29.49

Directly available from stock

  • Fast delivery
  • Excellent conditions
  • Very high satisfaction
  • Professional staff
SKU: AD1448 Categories: ,

Description

This Bosch Siemens NTC sensor probe is used in, among other things, TXL and older Maxx 6 models. The NTC (item number R2) is located on the heating element. When it has been exposed to temperatures below -15 °C or above 200 °C, the sensor can fail. 

First check whether the NTC value is still within the correct range. If it isn’t, replace the NTC. If the value is correct, it’s possible that the heating element is defective, and we also recommend installing a new NTC.

NTC values (note: NTC = resistor with a negative temperature coefficient; the resistance decreases as the temperature increases): 

25 °C: approx. 25 kOhm 

50 °C: approx. 7.2 kOhm 

80 °C: approx. 2.4 kOhm 

100 °C: approx. 1.3 kOhm 

Note: the values may differ slightly. 

With a defective NTC you often measure around 108 kOhm. This differs significantly from the desired resistance.

You can measure the sensor directly on the pins, but also via connector X11-5. Always unplug the connector first and work de-energized.

Order the correct NTC by providing the FD and E number from the type plate label. For a heating element you can also provide these numbers.

For this, we use a good-quality German Miele part. Still, check whether the connections match. You may also look at the other models on our page with NTC sensor probes

We also have sensor 00648818 = GB19, if needed.

Additional information

Brand

Bosch, Siemens, ATAG, Neff and Constructa