Description
Do you no longer hear the familiar click after switching on your vintage Marantz receiver, or does the sound from one or both speakers drop out? Often, after decades, the switching contacts of the speaker relay on the protection circuit board (P800) have burnt in or oxidized. With this new, high-quality replacement 24V DC speaker relay you can restore the sound reproduction of your Marantz receiver immediately.
Suitable for the following Marantz models, among others:
- Marantz Stereo Receivers: Marantz 2275, Marantz 2245, Marantz 2270, Marantz 2325, Marantz 2330, Marantz 2330B (depending on the version of the P800 circuit board).
- Marantz Quadro Receivers: Marantz 4270, Marantz 4300, Marantz 4400 (these use 2 pieces of 24V DC relays for the front and rear channels).
- Replaces, among others, the following relay codes: LY2-0-DC24, LY20DC24, LY2-DC24, LY2DC24, LY20240090 (Marantz part number for the 24V DC P800 protection relay).
Technical specifications and pin layout:
- Specific pin layout (P800 circuit board): This 8-pin relay has 6 wider switching contact pins in two rows of three, and 2 upper coil pins positioned crosswise (at right angles). This is the correct fit for the P800 protection board without any modifications to the circuit board.
- Coil voltage: 24V DC (direct current).
- Contact configuration: DPDT (2 separate changeover contacts for the left and right channels).
- Switching capacity: Maximum 10A at 250V AC / 30V DC.
- Quality: High-quality compatible replacement part, available directly from stock per piece.
Frequently asked questions (FAQ):
- Will this relay always fit in my Marantz 2275, 2245 or 2270?
In most versions of the Marantz 2275 (and 2245 / 2270), this 8-pin relay with two crosswise coil pins is fitted on the P800 circuit board. Before ordering, always check the underside of your old relay or the holes in the circuit board. Do all 8 pins on yours line up in two straight rows without crosswise pins? Then you need our JQX-13F / MY2-02 24V DC circuit board relay. - Do I need one or two relays for a quadro receiver such as the Marantz 4270?
A Marantz 4270 has two separate speaker relays (one for the front channels and one for the rear channels). We recommend replacing both relays at the same time when servicing. - After replacement, are both the left and right channels restored?
Yes. This relay has 2 separate changeover contacts (DPDT) and switches both speaker channels on at the same time once the amplifier is stable.
Customer service & Support:
- If you are unsure whether this relay fits the circuit board of your Marantz receiver, feel free to send us a message, optionally with a clear photo of the old relay on the circuit board.
- WhatsApp: +31625229613 (messages only via WhatsApp, calling this number is not possible).
- E-mail: [email protected]
Return conditions:
- You may return this electronic component only within 14 days of receipt if the sealed packaging is completely unopened and undamaged.
- We do not accept returns of relays that have already been installed, soldered, or used, due to the risk of electronic overload or short circuit during installation.






