Marantz 6300 lift oil for a tonearm lift that moves too fast

Special high-viscosity lift oil for a tonearm lift on the Marantz 6300 and other turntables that moves too fast. Supplied in a handy dosing syringe with a capacity of 1.5 ml.

€12.99

Directly available from stock

Sold per Piece

  • Fast delivery
  • Excellent conditions
  • Very high satisfaction
  • Professional staff

Description

Is the tonearm lift of your Marantz 6300 lift oil moving up or down too quickly? This is usually caused by dried-out high-viscosity lubricant in the lift mechanism.

The problem can also occur when contact cleaner, penetrating oil, or another thin liquid has been sprayed from above onto the vertical shaft of the tonearm. Never use this: the thick lubricant is what provides the damping of the lift. So use only this special thick lift oil and no thin oil. Silicone grease and faucet grease, which are sometimes mentioned on forums, are also too thin for this. You will receive a special thick oil in a handy dosing syringe, suitable for all brands of turntables.

Disassemble the underside, remove the electrical coil and then take out the shaft. Clean the hole and the shaft thoroughly, for example with methylated spirits, and let everything dry well. Then coat everything completely with this product and put the parts back.

You will receive a syringe with 1.5 ml.

Viscosity between 300,000 and 500,000 cSt.
Use this product, among others, for the Technics oil damper type SFPJL18202K & SFPJL18202A1.

WHAT SHOULD YOU DO?

  1. Unplug the power cord.
  2. Remove the cover.
  3. Remove the platter.
  4. Secure the tonearm with the clip.
  5. Loosen the horizontal arm-lift support. This is the support on which the arm rests and which lets the arm move up and down. Loosen the screw on the side for this, sometimes there are two screws, and remove the support together with the shaft.
  6. Turn the turntable over and support it with soft material so that the wood is not damaged.
  7. Remove the plastic cover with the four screws.
  8. Remove the relay and the bracket, see photo.
  9. Loosen the screw from the shaft. Remove the spring, after which another screw becomes visible. Remove this screw too, see photo.
  10. Now pull out the shaft.
  11. Clean and dry the shaft thoroughly. No traces of old grease may remain.
  12. Also clean the hollow tube of the shaft. Do not use cotton swabs: any residue left behind can later cause blockages.
  13. Grease everything generously and put the parts back.
  14. Remove excess grease.
  15. Reassemble everything, turn the player over and test operation.
  16. Note: do not finish assembling everything completely yet. First test the shutoff point at the end of the record. It may have bent or shifted slightly; now you can still get to it easily.

Questions about this product?

Send your question, optionally with photos, to our company WhatsApp 06-25229613 (messages only, calling is not possible) or email [email protected].

Euromaxx has over 30 years of experience restoring and repairing vintage audio equipment. We repair all hi-fi and audio brands and are the specialist in Marantz. Want to do it yourself? We also supply separate parts, including many specially manufactured items.

Also check out our reviews.

Additional information

Verkocht per