Description
This Miele F51 fault occurs in dishwashers and washing machines
A Miele F51 fault, according to the manufacturer, indicates a defective pressure switch or level regulator. Below, you can first read what this error message means for a dishwasher, and then the explanation for a washing machine.
DISHWASHER
What does the F51 error message on my Miele dishwasher mean?
The F51 error code indicates a fault in the pressure sensor. Based on the pressure, this sensor determines how much water is in the machine before the heating is switched on. This prevents the heating element from switching on while there is no water present. The programme is interrupted and the water present is pumped out.
Fixing the Miele F51 fault
We regularly come across the Miele F51 fault, including in newer dishwashers.
Tips: Fixing the Miele F51 fault yourself
- Check the water supply. First see whether the tap is open and whether water is coming out.
- Unplug the power cord from the socket.
- For a built-in dishwasher, you need to remove the appliance because you have to reach the underside.
- Carefully lay the dishwasher on its back.
- Remove the underside.
- You will now see the pump and the level regulator. These can usually be removed and replaced quite easily.
- Reassemble everything and reconnect the power. Do not install the machine yet, but first check whether everything works properly.
- Switch the machine on again.
At the end of your order, provide the machine numbers. These are on the side of the door. Several versions are possible, so we can send the correct one.
Afterwards, it is advisable to clean the dishwasher thoroughly right away. Bad smells in your dishwasher!
Can you measure whether the level regulator is defective?
On the model with three connections on both sides, you can measure it. There should be no reading between the middle connection and either outer connection. This applies to both sides.
F51 fault still not resolved?
In exceptional cases, the heating relay is defective. This relay can then send an incorrect signal to the pressure switch. This is uncommon, but if the fault persists after replacing the pressure switch, this is the most logical next step. Read more about this: Miele relay Schrack 5870220 € 86.99
WASHING MACHINE
What does the F51 error message on my Miele washing machine mean?
The F51 error code indicates a fault in the pressure sensor. Based on the pressure, this sensor determines how much water is in the machine before the heating is switched on. This prevents the heating element from switching on while there is no water present. The programme is interrupted and the water present is pumped out.
Fixing the Miele F51 fault
We regularly come across the Miele F51 fault, including in newer washing machines. We have extensive experience with this fault and can repair your washing machine at a competitive rate.
Tips: Fixing the Miele F51 fault yourself
- Check the water supply. First see whether the tap is open and whether water is coming out.
- Unplug the power cord from the socket.
- Remove the top cover of the washing machine. On the right side there is a round housing with wiring and a hose.
- This is the hose from the level regulator. Carefully disconnect the hose and blow through it thoroughly. Blow into the hose, not into the housing.
- Reassemble everything and reconnect the power.
- Switch the machine on again.
At the end of your order, provide the machine numbers. These are on a sticker in the door opening. Several versions are possible, so we can send the correct one.
Afterwards, it is advisable to clean the washing machine thoroughly right away. Bad smells in your washing machine!










