Samsung light for water container and lint filter – drain pump

Drain pump for Samsung tumble dryers where the light for the water container and lint filter flashes. In stock and shipped on the same business day when ordered on weekdays.

€64.99

Directly available from stock

  • Fast delivery
  • Excellent conditions
  • Very high satisfaction
  • Professional staff
SKU: AD2113 Category:

Description

The fault with the Samsung light for the water container and lint filter occurs regularly, including in relatively young appliances such as the SDC3D809 models and 8 kg versions.

There are two ways this fault can occur.

When switching on the machine, the indicator light “Filter” and the indicator light “full water tank” flash twice. After that, both lights go out. The machine then starts normally, but stops after a few minutes, after which both indicator lights light up again. The water tank is not used because a drain hose is connected to the machine. The condenser and the filter have already been cleaned.

In that case, the pump must be replaced. In a single case, the insulated wires do not fit the new pump model. Then simply cut off the insulation and connect the two wires back to the pump. There is no plus or minus connection, so the direction of connection does not matter.

At the end of your order, enter the type number of your appliance in the NOTES box. That way, we ensure you receive the correct pump.

Everything is in stock and ships on the same working day!

If you don’t provide any numbers, we will contact you by email to request them. That takes longer, so please provide the numbers directly if possible. These are usually located in the door opening and often also on the front; see photo.

The pump is usually the DC31-00105A 8713411118579 and 2.40.64.01-0.

It could also be a different fault that looks very similar to this. Read more about it on this page about the Samsung reservoir light